Products‎ > ‎Consumables‎ > ‎Peters‎ > ‎Conformal Coatings‎ > ‎Thin film lacquers‎ > ‎

Transparent thin film lacquers




-coloured transparent and/or fluorescent (index FLZ) adjustments enable the completeness
  of the coating to be easily controlled under day- or UV light (black light)
-partly available in special adjustments for processing on selective coating unitss






SL 1307 FLZ/2
Base: Modified acrylate resins

Can be soldered-through for repair purposes or removed with the help of thinner V 1307 FLZ/2
Excellent protection against corrosion (e.g. electro corrosion and migration) for assembled pcbs/flat packs
Tested acc. to IPC-CC-830B (Trace Lab Report)
UL approval for SL1307 FLZ/& as permanent coatings acc. to UL 94 and conformal coatings acc. to UL 746E
Used by leading suppliers of the automotive Industry
Very fast physical drying
Very high tracking resistance (CTI > 600)



SL 1307 FLZ-S
Base: Modified acrylate resins

Approved and used by leading suppliers of the automotive Industry
Can be soldered-through for repair purposes or removed with the help of thinner V 1307 FLZ
Colourless transparent, Fluorescent
Correspond to the best flame class V-0 acc. to UL 94
Excellent protection against corrosion (e.g. electro corrosion and migration) for assembled pcbs/flat packs
Practical spray can: ideal for pilot and low-volume series as well as for repair purposes
Tested acc. to IPC-CC-830B (Trace Labs Report)
Very fast physical drying
Very high tracking resistance (CTI > 600)



SL 1301 ECO-FLZ
Base: Modified polyurethane resins (PUR)

Approved and in use at leading automotive suppliers
Excellent protection against corrosion (e.g. electro corrosion and migration) for assembled pcbs/flat packs
Free of aromatic hydrocarbon solvents (for example no benzene, toluene, xylene and C9 aromatics)
UL approval as permanent coating acc. to UL 94
Very high tracking resistance (CTI > 600)



SL 1301 ECO-BA-FLZ
Base: Modified polyurethane resins (PUR)

Approved and in use at leading automotive suppliers
Excellent protection against corrosion (e.g. electro corrosion and migration) for assembled pcbs/flat packs
Special composition of solvents promotes a particularly uncritical drying behaviour under components
UL approval as permanent coating acc. to UL 94
Very high tracking resistance (CTI > 600)



SL 1331 N-LF-D
Base: Modified Polyurethane resin (PUR) 

Excellent protection against corrosion (e.g. electro corrosion and migration) for assembled pcbs/flat packs 
High continuous temperature resistance of 140º C (284º F) according to IEC 60216 
Red transparent 
UL approval according to UL 94 as permanent coatings: Best flame class V-0 acc. to UL 94 
Very high tracking resistance (CTI > 600)



SL 1305 AQ-ECO
Base: Polyurethane resins (PUR)

Excellent protection against corrosion (e.g. electro corrosion and migration) for assembled pcbs/flat packs
No odour annoyance
UL approval of the fluorescent adjustments as conformal coatings in accordance to UL 746E
Very fast drying to tack-free stage
Very good dielectric properties
Very high tracking resistance (CTI > 600)
Water-borne/aqueous lacquer system



SL 1306 N
Base: Modified acrylate resins

Excellent resistance to condensation and climatic influences, including surface dewing
Minimum odour
Outstanding corrosion protection for example, electro corrosion and migration) for assembled pcbs/flat packs
Suitable for the conformal coating of uncleaned assemblies when no-clean fluxes are used
UL approval as permanent coatings in accordance with UL 94
Very high tracking resistance (CTI > 600)



SL 1308 FLZ
Base: Modified epoxy resins (EP)

Colourless transparent, fluorescent
Correspond to the best flame class V-0 acc. to UL 94
Excellent protection against corrosion (e.g. electro corrosion and migration) for assembled pcbs/flat packs
Fungicidal additives protect against mould formation according to MIL-V-173C
High permanent temperature resistance of 150º C (302º F) according to DIN 60216 (IEC 60216)
Very high tracking resistance (CTI > 600)



SL 1309 N
Base: Modified acrylate resins

Correspond to the best flame class V-0 acc. to UL 94
Excellent adhesion to nearly all substrates
Excellent corrosion protection (for example, electro corrosion and migration) for assembled pcbs/flat packs
Mould resistant according to MIL-SID-810 E
Suitable as protective lacquers for uncleaned printed circuit boards when using no-clean fluxes
Very high tracking resistance (CTI > 600)



SL 1400 ECO-FLZ
Base: Polyurethane resins (PUR)

Colourless, fluorescent
Excellent protection against corrosion in case of high temperatures and humidities
Free of aromatic solvents
Free of heavy metals such as lead and chromium compounds, fulfils the requirements of the “lead-free regulation” (EU Vehicle End-Of-Life Directive 2000/53/EG)
Humidity curing conformal/permanent coating for assembled pcbs/flat packs